How To Remove Garage Door Spring

    A garage door spring enables your garage door to perform correctly.

    Not only it’s one of the most vital parts of a garage door that allows your garage door to work, but it also counterbalances the door.

    Counterbalance is an essential feature of springs as it holds the weight of your garage door to prevent an accident situation.

    So, if your garage door springs become injured, it’s necessary to take them out and install a new one.

    However, replacing a garage door spring is dangerous, and only a garage door maintenance specialist can install a new set of springs.

    In this article, we will talk about removing garage door springs.

    That’s why in this kind of situation, you need a reliable and trusted garage service company to help you fix the problem.

    At A1 Garage Door Pittsburgh, our certified garage door maintenance specialists are always ready to offer their work.

    Rest assured that our team of professionals will do the job promptly and correctly.

    You can call us at any time of the day as we are always available on all days of the week.

    Set your next appointment with us now.

    What Are The Two Types Of Garage Door Springs?

    Before you try to replace your garage door springs, it’s vital to know what type of garage door spring your door has.

    Below are the following:

    Extension Springs

    Torsion springs and extension springs are the two most common garage door springs.

    If you don’t know what type of spring your door has, you can look at the track line of your garage door.

    If you notice that the spring is typically seated there, your garage door spring type is extension springs.

    Extension springs are standard ones and have a measurement of 9×7.

    This type of width and length is a good advantage for most garage owners since it won’t fly around your property if they break.

    But, if your garage door has a two-way spring system, it’s necessary to purchase a safety cable for more security and safety.

    A safety cable prevents your garage door springs from harming the people around you if it snaps or splits into halves.

    Torsion Spring

    Torsion spring is the second type of spring most commonly used in heavy doors.

    If your garage door weighs 400lbs or above this, it’s necessary to use a torsion spring to balance the door correctly.

    Additionally, you should use two springs to carry the weight of your garage door to prevent accidents, such as collapsing.

    You can find this garage door spring at your garage’s wall where the door is currently installed.

    It is positioned and installed on the wall to provide clearance or space when the garage door is functioning.

    If your springs are broken or injured, you can call a garage door repairer to take out these springs and install a new set.

    In this way, you will not have a problem operating your door and worry about the risk of injuring someone.

    How To Remove Your Garage Door Springs

    Here is the step-by-step tutorial on how you can take out your torsion springs or extension springs.

    But, before you proceed in doing these steps, you must take safety precautions.

    If you incorrectly did the following steps, call a garage door technician to help you remove your garage door springs.

    Torsion Spring Removal

    1. First, you ensure that the door is not open.
    2. Obstruct your garage door springs by using locking pliers.
    3. Unscrew the screws at the winding cone.
    4. Unwind your torsion springs.
    5. Disconnect the torsion springs from the center bracket.
    6. Ensure that the torsion springs are secured.
    7. Disconnect the garage door lifting cables.
    8. Take out your torsion springs.

    Extension Spring Removal

    1. Lift your garage door completely.
    2. Obstruct your garage door in an open position.
    3. Disengage or unplug your garage door opener.
    4. Release the remaining tension on your garage door system.
    5. Take out the garage door spring pulley.
    6. Take out one end of the pulley.
    7. Remove the safety cable.
    8. Lastly, take out the extension springs.

    Conclusion

    Removing garage door springs is a difficult job, and only a professional garage door maintenance specialist can do it in the right way.

    Don’t hesitate to call our garage door company: A1 Garage Door Pittsburgh if you need this kind of service.

    Additionally, we offer garage door spring repair.

    Call us now!

    Rate this post

    Contact Us